Service report
Sagging floors, joists & wood rot repair
Floors that dip, bounce or feel soft usually trace back to something in the crawl space: a joist weakened by rot, a beam spanning too far between piers, a pier that settled, or framing that was undersized from the start. Repairs range from sistering one joist to adding new support posts under a girder. Moisture is often part of the story, so the fix should include a plan to keep the wood dry afterward.

Signs that point here
- A dip in the floor you can feel or see with a level
- Bouncy spots near the middle of a room
- Doors that start sticking on interior walls
- Dark, soft or crumbly wood when the joist is probed
- Gaps between baseboard and floor
What's involved
Step 01
Measure and probe
The contractor maps the low areas from above and below, probes framing for rot and checks how far beams span between piers.
Step 02
Repair the wood
Rotted sections of sill or joist are cut out and replaced, or a new full-length joist is fastened alongside the old one, called sistering.
Step 03
Add or correct support
Where a girder sags between piers, adjustable steel posts or new masonry piers on proper footings are added. Lifting is done gradually to limit cracking in drywall and tile.
Step 04
Permit and keep it dry
Structural work may need a building permit from the local inspections office; the contractor should confirm. Moisture control comes after so the new wood doesn't follow the old.
What moves the price
- Number of joists or beam sections involved
- New footings or piers versus steel posts
- Extent of rot in sill plates
- Permit and engineering requirements
- Clearance height to work in
| Published item | Range |
|---|---|
| Replace a support beam | $1,500–$4,000 |
| Foundation repair | $2,500–$8,000 |
These are published national ranges, not quotes. Your actual price could be higher or lower. The independent local contractor who inspects your crawl space sets the final price.
Sources: HomeGuide: Crawl Space Encapsulation Cost (updated January 14, 2026); HomeGuide: Crawl Space Repair & Cleaning Cost (updated February 5, 2026). Figures fetched October 24, 2026.
Questions about sagging floors, joists & wood rot
Will encapsulation fix sagging floors?
No. Encapsulation controls moisture so wood stays sound, but a floor that has already sagged needs structural repair. They are often done in the same project.
Can the floor be lifted back to level?
Often it can be brought closer to level, gradually. Older homes may have settled for decades, and the contractor may advise against forcing it all the way back.
Do I need a permit?
Structural changes to beams, piers or joists may require a building permit, such as from Mecklenburg County Code Enforcement inside Mecklenburg. The contractor should confirm and pull it.
Want someone to look under your house?
Call or send a short request. An independent local contractor will contact you to schedule an inspection and give you a written quote.
Next step
Request a look: sagging floors, joists & wood rot
Your request goes to an independent local contractor who works in your area. They call you to talk through what you're seeing, schedule an inspection, and give you their own written quote.
Call (980) 553-2333